Skip to content

HVS-4360. Solar Based Grass Cutter using ARDUINO UNO, SR04, BLDC motor and ESC

₹11,200.00

The Solar Based Grass Cutter is an automated grass-cutting system powered by solar energy.

Categories ,  Tags , , , 
The Solar Based Grass Cutter is an automated grass-cutting system powered by solar energy. A photovoltaic solar panel converts sunlight into electrical energy and charges the battery, which supplies power to the entire system. The Arduino UNO microcontroller acts as the main control unit and manages the movement and grass-cutting operations. DC motors are used for the movement of the vehicle, while an ESC (Electronic Speed Controller) is used to control the speed of the grass-cutting motor. An L298 motor driver is used to control the movement of the DC motors based on the signals received from the Arduino UNO. An HC-05 Bluetooth module is interfaced with the Arduino UNO to receive commands from a Bluetooth application installed on an Android mobile phone. Based on the received commands, the Arduino controls the movement and cutting operations of the grass cutter. An HC-SR04 ultrasonic sensor is used to detect obstacles in front of the vehicle. When an obstacle is detected, the system controls the vehicle to avoid collisions and move safely. The grass cutter can be operated through Bluetooth commands, allowing the user to control its movement and grass-cutting operation conveniently using solar energy.              

Objectives:
  1. To design and develop a solar-powered automatic grass-cutting robot using an Arduino UNO microcontroller.
  2. To utilize solar energy through a photovoltaic panel for charging the battery and powering the system.
  3. To control the movement of the grass cutter using DC motors and an L298 motor driver.
  4. To control the speed of the grass-cutting motor using an Electronic Speed Controller (ESC).
  5. To enable wireless operation of the grass cutter through an Android mobile application using an HC-05 Bluetooth module.
  6. To detect obstacles using the HC-SR04 ultrasonic sensor and avoid collisions during movement.
  7. To reduce manual effort, save electrical energy and provide an efficient grass-cutting solution.
             

The Major Building Blocks for This Project:
  1. Solar.
  2. Charging circuit.
  3. Battery.
  4. Arduino UNO.
  5. Bluetooth Module.
  6. Relay.
  7. L293D Motor driver.
  8. TWO DC Motors for Robot.
  9. BLDC Motor with Grasscutter.
  10. ESC.
  11. POT (speed control)
  12. Ultrasonic sensor.
               

Software’s used:
  • Arduino IDE for compiling and dumping code into Microcontroller
  • Express SCH for Circuit design.
  • Embedded C Language.
             

Block Diagram:          

video: