Skip to content
HVS-3538. Implementation of Railway Track Crack Detection System Using ESP32
HVS-3538. Implementation of Railway Track Crack Detection System Using ESP32
HVS-3538. Implementation of Railway Track Crack Detection System Using ESP32
HVS-3538. Implementation of Railway Track Crack Detection System Using ESP32
HVS-3538. Implementation of Railway Track Crack Detection System Using ESP32

HVS-3538. Implementation of Railway Track Crack Detection System Using ESP32

₹9,500.00

The project aims in designing robust railway crack detection scheme (RRCDS) using IR sensor which avoids the train accidents. And also capable of controlling the whole system by using the GPS based GSM modem. It also alerts if there is any obstacle in its way.

            The GPS is the acronym for Global positioning system. This GPS receiver is capable of identifying the location in which it was present in the form of latitude and longitudes. This information is very useful and can be processed for alerting the boat drivers. The GPS gives the data received from the satellites. For this information the GPS communicates with at least three satellites in the space.

Categories ,  Tags , 
The project aims in designing robust railway crack detection scheme (RRCDS) using IR sensor which avoids the train accidents. And also capable of controlling the whole system by using the GPS based GSM modem. It also alerts if there is any obstacle in its way. The GPS is the acronym for Global positioning system. This GPS receiver is capable of identifying the location in which it was present in the form of latitude and longitudes. This information is very useful and can be processed for alerting the boat drivers. The GPS gives the data received from the satellites. For this information the GPS communicates with at least three satellites in the space. In this Project presents an automotive localization system using GPS and GSM-SMS services. The system permits localization of the automobile and transmitting the position to the authorities on their mobile phone as a short message (SMS) at his request. Also, this system automatically sends alert messages to predefined numbers when accident takes place. In this project, let us consider the two tracks; each track will have one IR sensor. Like these two tracks have 2 IR sensors. Whenever there is a crack on the track, then the IR sensor senses that and gives its output to the ESP32 microcontroller. This tracking system is composed of a GPS receiver, ESP32 Microcontroller and a GSM Modem. GPS Receiver gets the location information from satellites in the form of latitude and longitude. The Microcontroller processes this information and this processed information is sent SMS to the authorities using GSM modem. It also alerts in the form of an SMS and Buzzer if there is any obstacle.

 

The main objectives of the project are:
  1. To detect the crack and sending alert to the respective authorities using GPS based GSM.
  2. To avoid the accidents at a single track.
  The project provides the following learning’s:
  1. GSM modem.
  2. IR sensor working.
  3. Ultrasonic sensor working.
  4. GPS receiver
  5. GSM based SMS.
  6. Conversion of AC supply to DC supply.
  7. Embedded C language.
  The main building blocks of the project are:
  1. Battery Power Supply.
  2. Esp32 Microcontroller.
  3. GSM modem
  4. GPS receiver.
  5. Ultrasonic Sensor.
  6. IR sensors.
  7. L293d driver two DC motors.
  8. Buzzer.
    Software’s used:  
  1. Arduino IDE Studio Compiler for Embedded C programming.
  2. Express SCH for Circuit design.
           

Block diagram:

video:

 

Related Products