hydro – HVS Technologies https://www.hvstechnologies.in Hub for Versatile Science & Technologies Wed, 27 May 2026 09:39:30 +0000 en-US hourly 1 https://wordpress.org/?v=7.1.3 https://www.hvstechnologies.in/wp-content/uploads/2025/07/favicon-32x32-1.png hydro – HVS Technologies https://www.hvstechnologies.in 32 32 HVS-4820. Microcontroller Based Data Acquisition and Smart Monitoring for Hybrid Renewable Energy Systems https://www.hvstechnologies.in/product/hvs-4820-microcontroller-based-data-acquisition-and-smart-monitoring-for-hybrid-renewable-energy-systems/ https://www.hvstechnologies.in/product/hvs-4820-microcontroller-based-data-acquisition-and-smart-monitoring-for-hybrid-renewable-energy-systems/#respond Wed, 27 May 2026 09:37:38 +0000 https://www.hvstechnologies.in/?post_type=product&p=22251

This project is designed to monitor and analyze power generated from solar, wind, and hydro energy sources using an Arduino Nano microcontroller. The system uses IoT technology to display and upload real-time renewable energy data to the ThingSpeak cloud platform for smart monitoring.

]]> The project titled “Microcontroller Based Data Acquisition and Smart Monitoring for Hybrid Renewable Energy Systems” focuses on the development of an intelligent system for monitoring and analyzing power generated from multiple renewable energy sources such as solar, wind, and hydro energy. The system combines these renewable sources to ensure reliable and continuous power generation while improving overall energy efficiency. A dual-axis solar tracker is used to maximize solar energy absorption by automatically tracking sunlight using LDR sensors and an SG90 servo motor.

The generated outputs from wind, solar, and hydro sources are processed through rectifier and capacitor circuits to provide stable DC power. Voltage sensors continuously monitor the output voltage from each energy source, and the collected data is processed by the Arduino Nano microcontroller. The measured parameters are displayed on an LCD screen for local monitoring.

To enable smart and remote monitoring, the system integrates an ESP8266 Wi-Fi module that uploads real-time data to the ThingSpeak cloud platform using IoT technology. This allows users to monitor renewable energy generation from anywhere through the internet. The proposed system provides efficient data acquisition, real-time monitoring, improved renewable energy utilization, and low-cost implementation. It is highly suitable for smart grid applications, remote energy management systems, and sustainable power generation projects.

 

 

The main objectives of the project are:

  • To design a hybrid renewable energy system using solar, wind, and hydro sources.
  • To monitor voltage and current from renewable sources and battery in real-time.
  • To optimize solar energy harvesting using LDR sensors.
  • To display system parameters on a LCD for local monitoring.
  • To transmit data to the ThingSpeak IoT platform via a Wi-Fi module.

 

 

 

The major building blocks of this project are:

  • Arduino Nano.
  • DUAL AXIS Solar cell/plate.
  • Wind.
  • Hydel.
  • LDR sensors.
  • ESP8266 WIFI module.
  • LCD display.
  • Voltage Sensors.
  • Servo Motors.

 

Software’s used:

 

  1. Arduino ide compiler for Embedded C programming.
  2. Express SCH for Circuit design.

 

 

 

Regulated power supply:

 

 

 

 

 

 

 

 

 

video:

]]> https://www.hvstechnologies.in/product/hvs-4820-microcontroller-based-data-acquisition-and-smart-monitoring-for-hybrid-renewable-energy-systems/feed/ 0